Side table made of European alder - tree slice bark approx. 50 cm Ø and 3 cm thick.
Practical side table in various heights made of solid wood and black lacquered metal.
Table top Ø 51-55 cm x 3 cm alder tree slice with bark - the bark also sticks for a long time. The slice has been dried extremely slowly so that no large cracks can occur. The hairpin legs are made of robust metal and are supplied with plastic feet and screws. Legs must be assembled by the customer.
Each table is unique and made by hand.
Various surfaces available:
- raw, sanded but untreated surface. The most natural option but susceptible to dirt
- oiled, oiled with natural linseed oil for a matt, darker surface that is resistant to dirt but susceptible to water stains
- lacquered, slightly glossy surface which is easy to clean and disinfect.
Safety Information for Side Table Made of Tree Slice with Metal Legs
-
Warnings:
- Warning: The table is heavy and may cause injury if mishandled. Transport with care.
- Place the table on a stable, level surface to prevent tipping.
- Ensure the metal legs are installed in a way that the table stands securely, minimizing tipping risks, especially for children.
- The metal legs may have sharp edges. Handle with caution to avoid injury.
-
Usage Instructions:
- Use the table only for its intended purpose (as a side table). Overloading may cause damage.
- Maximum load capacity: Please refer to the manufacturer’s weight limit.
-
Care Instructions:
- Clean the wooden surface with a dry or slightly damp cloth. Avoid using harsh cleaning agents.
- Wipe the metal legs with a dry cloth as needed to prevent rust.
- Treat the wooden surface regularly with wood care oil to prevent cracks or drying.
-
Additional Notes:
- This product is made from natural materials. The wood may warp slightly with temperature changes or humidity.
- Regularly check the screws securing the metal legs and tighten them if necessary.
- During assembly, make sure the legs are positioned to ensure the table does not wobble or tip over.
Care Instructions for Wooden Products
To ensure lasting enjoyment of our high-quality wooden items, we recommend regular and gentle care. Wood is a natural material – each piece is unique – and deserves special attention in daily use.
Cleaning
Never clean wooden products in the dishwasher. The combination of heat, moisture, and detergents can permanently damage the wood. Instead, wipe the surface with a damp cloth and a little mild dish soap. Dry thoroughly with a clean towel immediately afterward.
Drying
Do not leave wooden products wet or place them on a heat source. Always let them air dry while standing upright. This helps prevent warping or cracking.
Oiling
To keep the surface smooth and resilient, we recommend treating the wood regularly with a natural oil – such as cold-pressed linseed oil. The oil protects against moisture, enhances the wood grain, and gives it a warm appearance.
Apply the oil sparingly to the clean, dry surface using a soft cloth. Wipe off any excess after about 15 minutes and allow it to dry completely – ideally overnight.
Important Notes
- Avoid soaking in water for extended periods.
- Keep away from direct heat or sunlight.
- Oiled wood may darken slightly over time – this is a natural process.
With the right care, your wooden product will remain a durable and natural companion in everyday life. If you have questions or need product recommendations, we’re happy to help!
There are no reviews yet.
